220HP Sem922awd 4, 279mm Blade& 16.5ton & 162 Kw All-Wheel Drive Road Machine Motor Grader with Blade and Ripper

• Customization: Available
• After-sales Service: 24hours Online Support
• Warranty: 1 Year
• Model NO.: SEM922AWD
• Certification: ISO, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Hydraulic
• Walking Mode: Wheeled
• Type: Small Grader
• Standard Operating Weight: 16,560kg
• Weight (with Ripper+Front Blade): 17,970kg
• Min. Turning Radius: 7800mm
• Articulation Angle, Left /Right: 20%
• Wheelbase: 6,140mm
• Travel Speed, Forward: 5.2/8.1/13/19.8/29/40km/H
• Travel Speed, Reverse: 5.3/12/25km/H
• Rated Power: 162kw/ 2,200rpm
• Displacement: 8.82L
• Blade Width, Standard: 4,279mm
• Max. Blade Position Angle: 90
• Max. Lift Above Ground: 475mm
• Max. Cutting Depth: 715mm
• Moldboard Height: T 610mm
• Transport Package: Suitable for Transmission
• Specification: 8, 854*2, 630*3, 360mm
• Trademark: SEM
• Origin: China
• HS Code: 8429401900
• Production Capacity: 1000 Units/Month
• Package Size: 11100.00cm * 2250.00cm * 3000.00cm
• Package Gross Weight: 17970.000kg

Product Description

Product Description

220HP SEM922AWD | 4,279mm Blade& 16.5Ton & 162 kW | All-wheel Drive Road Machine Motor Grader with Blade and Ripper
 

The SEM F series Tier 2 Motor Grader is equipped with an SDEC engine and a PPPC load-sensing hydraulic system for consistent and precise blade movement and reduced fuel consumption. The SEM rear tandem axle, designed and manufactured by Caterp-illar, leverages the proven Caterp-illar tandem axle design to deliver differentiated reliability and a longer service life, resulting in lower owning & operating costs.

With these enhancements, SEM's new F series Motor Grader offers improved competitiveness and solutions to support the success of our dealers and customers.
 

S.E.M Tandem Axle
-Leveraging designing and experience on MG tandem axle
-Improved bearing Layout and optimized load distribution with 4 planetary gears final drive
-Less down time and reduced labor and service cost for maintenance and repairing
-Longer service interval for lubrication oil change
-Leading in class manufacturing and quality control level, mandatory performance testing before delivering to MG assembly line

Control System
-7 position link bar with electric over hydraulic control allows ease of operation from within the cab
-Optimum blade reach capability, quick DCM re-positioning for greater reach for better working on high bank side slope
-The link bar is essential for extending reach capability when cutting a bank slope or back slope of a ditch
-Replaceable bushings reduce service time and cost
 

Operate in comfort

• Standard float function for high efficiency and simple operation.
• Caterp-illar's classic lever control with a short distance and stroke.
• Adjustable console and seat with optimized ergonomics.
• Cab with improved airtightness and noise reduction.
• Added vents in the new dashboard and cab columns for increased comfort.

Low cost per hour

• Less heat and fuel consumption; load-sensing and PPPC hydraulic system offer increased efficiency.
• Hydraulic cooling fan, high efficiency in various ambient temperature conditions and enhances cooling effect.
• Caterp-illar (Qingzhou) in-house tandem axle, final drive units with four planetary gears, oil-bath lubrication, and maintenance-free and adjustment-free chain support a higher carrying capability.
• Dismountable drawbar ball joint for easy replacement and maintenance.

Drawbar
-A-frame tubular design drawbar provides SEM919 motor grader maximum strength and durability
-Replaceable drawbar draft ball (bolted - not welded) for less service time and cost
-Easy removal of wear shims to adjust drawbar

Front Frame
-Flanged box section design removes welds from high stress areas, improving reliability and durability
-Continuous top and bottom plate construction provides SEM919 motor grader consistency and strength, improving front frame durability
-Hydraulic hose routing minimizes exposure to damage and provides quick access for service
-Maintenance-free bushings improve durability and reduce overall service cost

Control Layout
-Short throw levers are efficiently spaced, allowing ease of multi-function control
-Short lever travel (40mm) with low lever effort reduces operator fatigue
 

Product Parameters

 

Standard Weight (Non ROPS base)	15,418kg
Standard Weight (with ROPS)	15,735kg
Overall Dimensions (L*W*H)	11,100*2,630*3,140mm
Travel Speed (Forward/Reverse)	40/25 km/h
Max. Drawbar traction	87kN
Frame Articulation Angle	20°
Min. Turning Radius	7,800mm
Tire	17.5-25 12PR
Engine Manufacturer	SDEC
Engine Model	SC7H200.2G2
Max. Torque	760N.m @ 1400RPM
Net Power	147kW @ 2200RPM
Emission	Tier 2
Brand / Manufacturer	Advance/HangChi
Type	Converter, Powershift
Forward / Reverse Gears	6 Forward / 3 Reverse
Brand / Manufacturer	SEM/Cater-pillar
Differential	No-Spin
Service Brake	Air over oil, Disc
Oscillation Front Up	15°
Oscillation Front Down	25°
Ground Clearance	630mm
Wheel Lean, Left / Right	±18°
Max. Oscillation	±16°
Steering Range, Left / Right	±47.5°
Blade Width, Standard	3,974mm
Blade Width, Optional	3,669/4,279mm
Blade Height	610mm
Blade Thickness	20mm
Float Function	YES
Max. Cutting Depth	715mm
Max. Lifting Height	475mm
Fuel Tank	280L
Engine Oil	17.5L
Coolant	50L
Transmission	28L
Differential Case	33L
Tandem Case, Each Side	62L
Circle Drive, Non Slip Clutch	2L
Circle Drive, With Slip Clutch	7L
Hydraulic Oil Tank	55L

 

Detailed Photos

Company Profile