165HP Motor Grader GR165 with Front Blade and Rear Ripper
The GR165 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm. lands etc. It is the necessary construction machinery for national defense construction, mine construction. urban and rural road construction and water conservancy construction, farmland improvement and so on.
· GR165 adopt 6BTA5.9-C180-II turbocharged diesel engine, large output torque and power reserve coefficient and low oil
consumption.
· The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation
characteristic with the engine.
· Energy-saving and noise-reducing: adopt low-speed engine transmission line, low specific fuel consumption of rated point, energy saving and environmental protection; low-speed ratio configuration of transmission system, average fuel consumption reduced by about 8%.
·The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and
reliable.
| GR165 |
| Engine rated power/rev |
125kW/2200rpm |
| Dimension |
8900×2625×3470mm |
| Weight |
15000kg |
| Distribution weight of front wheel |
4500kg |
| Distribution weight of rear wheel |
10500kg |
| Min. clearance |
430mm |
| Front and rear axle clearance |
6219 mm |
| Front and rear axle clearance |
1639mm |
| Max. steering angle of front wheel |
±50° |
| Max. inclination angle of front wheel |
±17° |
| Max. swing angle |
±15° |
| Frame steering angle |
±27° |
| Min. turning radius |
7.3m |
| Traction |
≥77kN |
| Gradeability |
20% |
| Forward speed |
5,8,11,19,23,38 km/h |
| Reverse speed |
5,11,23 km/h |
Audited Supplier 
){kind=link}