Gr180 180HP China Motor Grader Gr180 Machine Full Hydraulic with Ripper and Bulldozer Road Machinery in Stock for Hot Sale

• Customization: Available
• After-sales Service: Provide
• Warranty: Provide
• Model NO.: GR180
• Certification: TUV, ISO, RoHS, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Power
• Walking Mode: Wheeled
• Type: Oversize Grader
• Forward Speed(Km/H): 38
• Reverse Speed(Km/H): 23
• Weight: 15400 Kg
• Dimension(L*W*H): 8970*3660*3420mm
• Rated Output(Kw): 142kw@2200rpm
• Peak Torque: 17.5-25
• Maximum Gradeability: ≥25%
• Tractive Effort F=0.75: ≥79 kN
• Working System Pressure: 18MPa
• Ground Clearance (Front Axle): 430mm
• Forward Velocity: 5/8/11/19T Km/H
• Reverse Speed: 2005/11/23km/H
• Tire Inflation Pressure: 260kpa
• Minimum Turning Radius: 7.3m
• Maximum Lift Height: 450m
• Transport Package: Bulk
• Specification: 6880*2375*3150mm
• Trademark: KOMATCO
• Origin: Jiangsu, China
• Package Size: 90.00cm * 90.00cm * 90.00cm
• Package Gross Weight: 12500.000kg

Product Description

Product Description

Cheap Price Top Brand 180HP GR180 Grader Motor With Optional Attachment

The GR180 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm-lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

1. GR180 adopt Dongfeng 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.
2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.
3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.
4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.
5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.

If you need this, Please contact me: [phone]
 

Detailed Photos

Product Parameters

Item			GR180
Basic parameters	Engine model		6CTA8.3-C190-II
	Rated power/speed		142kW/2200rpm
	Overall dimension (standard)		8900x2625x3420
	Total weight (standard)		15400 kg
	Tire specification		17.5-25
	Ground clearance (front axle)		430mm
	Tread		2156mm
	Space of front and rear axles		6219 mm
	Space of middle and rear wheels		1538 mm
Performance parameters	Forward velocity		5/8/11/19/23/38km/h
	Reverse speed		5/11/23km/h
	Tractive effort f=0.75		≥79 kN
	Maximum gradeability		≥25%
	Tire inflation pressure		260kPa
	Working system pressure		18MPa
	Transmission pressure		1.3-1.8Mpa
Working parameters	Maximum steering angle of front wheel		±50°
	Maximum slant angle of front wheel		±17°
	Maximum oscillating angle of front axle		±15°
	Maximum oscillating angle of equilibrium box		±15°
	Maximum steering angle of frame		±27°
	Minimum turning radius		7.3m
	Scrape knife	Maximum lift height	450mm
		Maximum cutting depth	500mm
		Maximum tilt angle	90°
		Cutting angle	28°-70°
		Angle of revolution	360°
		Length & chord height	3965x610mm

Company Profile